These popsicles have the flavors of cherry, lime, and blue raspberry just like the original bomb pop! The best part is the epic mashup of colors and our favorite candy flavors wrapped into one frozen treat on a stick, plus they are very simple to make!
Popsicle Molds (affiliate link for the mold I used) - https://amzn.to/3AukSqR
12
Ingredients
1cupcherry Kool-Aid
¾cuplimeade
¼cupheavy cream
1cupblue raspberry Kool-Aid
Instructions
Prepare cherry and blue raspberry Kool-Aid according to packet instructions (you can use regular sugar or Splenda for sugar-free, if desired)
Pour cherry Kool-aid into the bomb pop popsicle molds, filling ⅓ of the way full. (For a 2 oz. mold, ⅓ is about 1 ⅓ tablespoons of Kool-aid.)
Place the molds into the freezer for 2-3 hours or until the liquid is frozen solid.
Pour the cream into the limeade and stir until fully combined. Add the second layer of “white liquid” on top of the frozen red layer. Check to determine if you will need to add the lids to the popsicles at this point - see notes for some ideas on this.
Freeze the popsicles for another 2-3 hours until the second layer is solid.
Add the blue Kool-aid to top off the popsicles and freeze until solid. (Add popsicle sticks before freezing if you have not already done so.
Loosen the popsicle from the molds by running them briefly under lukewarm water or by setting on the counter for a couple minutes until they slide easily from the molds.
Notes
Coconut milk can be used as a dairy free option and also will not curdle with the limeade. Though I didn't have any trouble with the cream, the coconut milk is an option if you run into this.Each layer needs to be solid before adding the next or else they will bleed into each other.If using the stick/lid that comes with this particular mold set, place it on and freeze into the white layer. To add the blue layer, you will need to wiggle the cap to the side. If desired, toss the lids that came with the mold and use wooden sticks instead. This would be the easiest method. You can also freeze the white layer, then use a knife to make a slit. Add the blue layer, then the stick.